THE CORE OF YOUR HARNESS
Prolimit harnesses are designed with a solid internal 3D shaping structure and incorporate advanced composite technologies, including outer shells, carbon outer shells, and thermoformed 3D foams.
What truly sets Prolimit apart is the internal design.
Our Mark Loadplates distribute pressure evenly, ensuring the perfect balance of support and flexibility. While other harnesses may look similar on the outside, it’s this internal structure that guarantees a superior fit, lasting comfort, and optimal performance on the water.
innershells
Mark I
High-back support design with stiff flex profile.
Features side pillows with four flex zones for maximum stability. Constructed with a 38mm webbing connection to the straps, it evenly distributes pressure. Minimal waist height around the ribs for maximum freedom of movement.
Featured on:
Type-T Windsurf Harness
Envy Windsurf Harness
Rookie Waist Harness
Rookie Seat Harness
MARK II
Medium back support with a medium flex profile.
Features side pillows and back support with six flex-zones. Constructed with double 25mm webbings on each side to have a wide transfer of the load forces. Medium waist height around the ribs for maximum freedom of movement.
Featured on:
Hybrid Windsurf Harness
Solar Kitesurf Harness
Vector Kitesurf Harness
MARK III
Medium-height back support with a flexible profile.
Features side pillows and back support with two max flex zones for vertical flexibility. Double 25mm webbings on each side for wide load distribution. Medium waist height around the ribs ensures maximum freedom of movement.
Featured on:
Vault Windsurf Harness
Luna Windsurf Harness
Assault Kitesurf Harness
Eve Kitesurf Harness
Edge Kitesurf Harness
MARK IV
High to medium-height back support with a medium-stiff profile.
Features side pillows and back support with two max flex zones for edge flex and two horizontal flex zones. Double 25mm webbings on each side for wide load distribution. Reduced medium waist height around the ribs ensures maximum freedom of movement.
Featured on:
Teamwave Windsurf Harness
Mark I
High-back support design with stiff flex profile.
Features side pillows with four flex zones for maximum stability. Constructed with a 38mm webbing connection to the straps, it evenly distributes pressure. Minimal waist height around the ribs for maximum freedom of movement.
Featured on:
Type-T Windsurf Harness
Envy Windsurf Harness
Rookie Waist Harness
Rookie Seat Harness
MARK II
Medium back support with a medium flex profile.
Features side pillows and back support with six flex-zones. Constructed with double 25mm webbings on each side to have a wide transfer of the load forces. Medium waist height around the ribs for maximum freedom of movement.
Featured on:
Hybrid Windsurf Harness
Solar Kitesurf Harness
Vector Kitesurf Harness
MARK III
Medium-height back support with a flexible profile.
Features side pillows and back support with two max flex zones for vertical flexibility. Double 25mm webbings on each side for wide load distribution. Medium waist height around the ribs ensures maximum freedom of movement.
Featured on:
Vault Windsurf Harness
Luna Windsurf Harness
Assault Kitesurf Harness
Eve Kitesurf Harness
Edge Kitesurf Harness
MARK IV
High to medium-height back support with a medium-stiff profile.
Features side pillows and back support with two max flex zones for edge flex and two horizontal flex zones. Double 25mm webbings on each side for wide load distribution. Reduced medium waist height around the ribs ensures maximum freedom of movement.
Featured on:
Teamwave Windsurf Harness
Outershells
Bringing the inside to the outside. Our profiles inner shells moved to the outside. Keeping the same principles, 3D profiled, and plates directly connected to the harness webbings.
Mark V Carbon Hardshell
High to medium-height back support and a deep back support profile.
Constructed with double 25mm webbings on each side for wide load distribution evenly across the harness. The high side flex ensures maximum maneuverability.
Featured on:
Alpha Kitesurf Harness
Mark VI Pure Outershell
Features medium flex height back support with stiff/medium flex back support and a deep-back support profile.
Constructed with double 25mm webbings on each side for even load distribution across the harness. High side flex ensures maximum maneuverability.
Made from the unique, indestructible PURE™ material.
Featured on:
Argon Windsurf Harness
Vapor Kitesurf Harness
Mark VII Pure Outershell
Features stiff flex height back support with stiff/medium flex back support and a deep-back support profile.
Constructed with double 25mm webbings on each side for even load distribution across the harness. Medium side flex ensures maximum maneuverability.
Made from the unique, indestructible PURE™ material.
Featured on:
Addict Kitesurf Harness
Mark VIII Outershell
Made from stiff composite materials, this harness offers stiff height back support, evenly distributed back support.
The medium-low deep back support ensures optimal fit and support. Constructed with double 25mm webbings on each side for wide and even load transfer across the harness. Extended side stiffness provides maximum support.
Featured on:
Atom Kitesurf Harness
Mark V Carbon Hardshell
High to medium-height back support and a deep back support profile.
Constructed with double 25mm webbings on each side for wide load distribution evenly across the harness. The high side flex ensures maximum maneuverability.
Featured on:
Alpha Kitesurf Harness
Mark VI Pure Outershell
Features medium flex height back support with stiff/medium flex back support and a deep-back support profile.
Constructed with double 25mm webbings on each side for even load distribution across the harness. High side flex ensures maximum maneuverability.
Made from the unique, indestructible PURE™ material.
Featured on:
Argon Windsurf Harness
Vapor Kitesurf Harness
Mark VII Pure Outershell
Features stiff flex height back support with stiff/medium flex back support and a deep-back support profile.
Constructed with double 25mm webbings on each side for even load distribution across the harness. Medium side flex ensures maximum maneuverability.
Made from the unique, indestructible PURE™ material.
Featured on:
Addict Kitesurf Harness
Mark VIII Outershell
Made from stiff composite materials, this harness offers stiff height back support, evenly distributed back support.
The medium-low deep back support ensures optimal fit and support. Constructed with double 25mm webbings on each side for wide and even load transfer across the harness. Extended side stiffness provides maximum support.
Featured on:
Atom Kitesurf Harness
PURE™
A standout feature of Prolimit harnesses is our use of PURE™ composite.
PURE™ is top-of-the-range, 100% polypropylene, self-reinforced composite material. It is non-resin based and is a unique, yet durable, low weight and touch thermoplastic composite. PURE™ is thermos-formable under heat in press form processes. Furthermore, it does not splinter and has unique properties making it an excellent material for the Vapor, Addict and Argon harnesses.
PURE™ is patented and a trademark-protected material and its durability and elasticity are perfectly suited for harnesses. PURE™ is also very strong at even low temperatures – for snow kiting for example – and is a material with ballistic properties. The material can also be found in other high wear and impact products, such as ice skates, high end travel luggage and sail reinforcements.
SEAMLESS NEOPRENE SOFT EDGES
No discomfort, no chafing, stronger construction.
Prolimit harnesses follow more of a modular construction, meaning each part is considered. The outer profile of the soft edge has no seam, reducing the chances of chafe and discomfort.
SPREADERBARS
A spreader bar is a crucial component to provide pressure distribution from the harness to your body, enhancing both comfort and performance. Our spreader bars are designed to provide you with the best fit and durability, all while ensuring freedom of movement during your sessions.
Pin Release Bar
The Pin-release spreader bar has an added safety. In extreme situations the pin release can be pulled as a safety and release your entire harness from your body. Our spreaderbars for kiteboarding are equipped with a short leash connection on the front, on the pin-release with a steel loop.
Alpha Bar
Our high-performance spreader bar designed for precision and comfort. Featuring a 3D shaped, molded EVA skeleton barpad for even load distribution and excellent support. Built with fiber-reinforced matrix plastic for durability, including a quick release spring lever. The Alpha Bar is multi-hook compatible (kite, windsurf, rope bar) and the slide-in barpad integrates seamlessly with our harnesses.
Single, Dual or Multi-Webbing
Prolimit offers three webbing options for harnesses: Dual Webbing, Single Webbing, and Multi Webbing. Dual Webbing is designed for harnesses with double straps, ensuring even load distribution and added stability. Single Webbing offers ultimate maneuverability with a single attachment. Multi Webbing is versatile, fitting both single and dual webbing harnesses, providing a secure fit and optimal pressure distribution for comfort and performance.
Prolimit introduced…
The first kite-specific harness.
The first neoprene softedge harness, comfortable was key.
The first innerbelt system, absorbing shock loads on your kidneys and back. Creating a nice snug fit.
The first Pin Release closure system with added safety.
Dual foam system in harnesses. Soft on your body, stiffer on the outside to transfer and distribute the load force evenly.
The first slide-in barpad.
The first shell-based harnesses.